Acetylene, dissolved in DMF
Manufacturer Information
Name
Praxair Inc
Address
10 Riverview Drive
Danbury, 06810-6268
Phone
1-800-772-9247
Effective Date
2016-10-26
Pictogram
NFPA
0
4
2
HMIS
Health |
2 |
Flammability |
4 |
Physical Hazard |
2 |
Personal Protection |
Wear safety glasses with side shields. At a minimum, this includes welder’s gloves and protective goggles. Wear cold insulating gloves when trans filling or breaking transfer connections.and may include arm protectors, aprons, hats, and shoulder protection as well as substantial clothing. |
Signal Word
Danger
Hazard Statements
- EXTREMELY FLAMMABLE GAS.H231 - MAY REACT EXPLOSIVELY EVEN IN THE ABSENCE OF AIR AT ELEVATED PRESSURE AND/OR TEMPERATURE H280 - CONTAINS GAS UNDER PRESSURE; MAY EXPLODE IF HEATED OSHA-H01 - MAY DISPLACE OXYGEN AND CAUSE RAPID SUFFOCATION CGA-HG04 - MAY FORM EXPLOSIVE MIXTURES WITH AIR
Precautionary Statements
- P202 - Do not handle until all safety precautions have been read and understood P210 - Keep away from Heat, Open flames, Sparks, Hot surfaces. - No smoking P271+P403 - Use and store only outdoors or in a well-ventilated place P377 - Leaking gas fire: Do not extinguish, unless leak can be stopped safely P381 - Eliminate all ignition sources if safe to do so P501 - Dispose of contents/container in accordance with container Supplier/owner instructions CGA-PG05 - Use a back flow preventive device in the piping CGA-PG13 - Fusible plugs in the top, bottom, or valve melt at 98 °C to 107 °C (208 °F to 224 °F). Do not discharge at pressures above 15 psig (103 kPa). Close valve after each use and when empty CGA-PG11 - Never put cylinders into unventilated areas of passenger vehicles CGA-PG02 - Protect from sunlight when ambient temperature exceeds 52°C (125°F)
Kern Community College District Local data
- SKU #
*This local data is shared by all revisions
