COORS CERAMICS CO -- CERAMIC MARKING INK  -- 7510-00N030200
<pre>=====================  Product Identification  =====================

Product ID:CERAMIC MARKING INK
MSDS Date:05/08/1987
FSC:7510
NIIN:00N030200
=== Responsible Party ===
Company Name:COORS CERAMICS CO
Address:600 NINTH ST
City:GOLDEN
State:CO
ZIP:80401
Country:US
Info Phone Num:303-278-4000
Emergency Phone Num:303-278-4000
Preparer's Name:L. J. COLLUM
CAGE:0KXL6
=== Contractor Identification ===
Company Name:COORS CERAMICS CO
Address:600 NINTH ST
Box:City:GOLDEN
State:CO
ZIP:80401
Country:US
Phone:303-278-4000
CAGE:0KXL6

=============  Composition/Information on Ingredients  =============

Ingred Name:BISMUTH TELLURIDE;(BISMUTH SUB-NITRATE)
CAS:1304-82-1
RTECS #:EB3110000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9394

Ingred Name:COBALT OXIDE
CAS:1307-96-6
RTECS #:GG2800000

Ingred Name:OILS;(DIEKENFIELD #1361 OIL)

Ingred Name:TURPENTINE
CAS:8006-64-2
RTECS #:YO8400000
OSHA PEL:100 PPM
ACGIH TLV:100 PPM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:PRODUCT MAY VAPORIZE AND CAUSE
    IRRITATION TO EYES, SKIN AND RESPIRATORY TRACT. CHRONIC:MAY CAUSE
    ALLERGIC SENSITIZATION, KIDNEY IRRITATION, ALBUMINURIA, HEMATURIA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL:MOVE TO FRESH AIR. IF NECESSARY GIVE ARTIFICIAL
    RESPIRATION; GET MD. EYE:IRRIGATE IMMEDIATELY WITH LARGE QUANTITIES
    OF WATER. SKIN:WASH WITH SOAP & WATER, REMOVE SOILED CLOTHING.
    INGEST:DO NOT I NDUCE VOMITING. GET MD FOR QUANTITIES ABOVE A FEW
    DROPS.

=====================  Fire Fighting Measures  =====================

Flash Point:97.0F,36.1C
Lower Limits:0.8%
Extinguishing Media:CARBON DIOXIDE, CARBON TETRACHLORIDE, DRY CHEMICAL
    OR FOAM. WATER MAY BE INEFFICIENT
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:COVER WITH INERT MATERIAL SUCH AS FULLER'S
    EARTH, EARTH, SAND, ETC. COLLECT FOR LATER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE DISTANT FROM HEAT & FLAMES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NORMALLY NONE REQUIRED. FOR AIR CONCENTRATIONS
    GREATER THAN THE TLV, USE NIOSH/MSHA APPROVED ORGANIC RESPIRATOR
    WITH FULL FACEPIECE.
Ventilation:ADEQUATE TO STAY BELOW TLV OF TURPENTINE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:GOOD INDUSTRIAL HYGIENE PRACTICE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:356F,180C
Vapor Density:4.84
Spec Gravity:1.47 (WATER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK LIQUID, ODOR OF TURPENTINE
Percent Volatiles by Volume:10

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COBALT DUST.

====================  Disposal Considerations  ====================

Waste Disposal Methods:COLLECT LIQUID, INCINERATE IN APPROVED
    EQUIPMENT, OR USE LANDFILL ACCORDING TO LOCAL, STATE, AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.