PERMATEX INDUSTRIAL CORP -- PLASTIC CLEANER 80183  -- 7930-00-935-3794
<pre>=====================  Product Identification  =====================

Product ID:PLASTIC CLEANER 80183
MSDS Date:03/30/1990
FSC:7930
NIIN:00-935-3794
=== Responsible Party ===
Company Name:PERMATEX INDUSTRIAL CORP
Address:30 TOWER LANE
City:AVON
State:CT
ZIP:06001
Country:US
Info Phone Num:203-677-7727
Emergency Phone Num:203-677-7727
Preparer's Name:STEPHEN REPETTO
CAGE:DO527
=== Contractor Identification ===
Company Name:PERMATEX INDUSTRIAL CORP; LOCTITE CORP
Address:30 TOWER LANE; AVON PARK SOUTH
Box:11915
City:AVON
State:CT
ZIP:06001
Phone:203-677-7727
CAGE:DO527

=============  Composition/Information on Ingredients  =============

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 65-70%
Other REC Limits:NONE SPECIFIED

Ingred Name:VM&P NAPHTHA
CAS:8030-30-6
RTECS #:DE3030000
Fraction by Wt: 20-25%
Other REC Limits:NONE SPECIFIED
OSHA PEL:300 PPM/1370 MG/M3
ACGIH TLV:300 PPM/1350 MG/M3

Ingred Name:CALCIUM CARBONATE
CAS:471-34-1
RTECS #:FF9335000
Fraction by Wt: 5-10%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15MG/M3DUST/5MG/M3RE
ACGIH TLV:10 MG/M3 DUST

Ingred Name:POLY (DIMETHYLSILOXANE)
CAS:63148-62-9
Fraction by Wt: < 1%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Health Hazards Acute and Chronic:LONG TERM EXPOSURE TO LIQUID MAY CAUSE
    DRYING AND CRACKING OF SKIN. NARCOSIS AT HIGH CONCENTRATION.
Effects of Overexposure:DIZZINESS, HEADACHE, NAUSEA. LONG TERM EXPOSURE
    TO LIQUID MAY CAUSE DRYING AND CRACKING OF SKIN. NARCOSIS AT HIGH
    CONCENTRATION.

=======================  First Aid Measures  =======================

First Aid:INGESTION:DO NOT INDUCE VOMITING. OBTAIN MEDICAL ATTENTION.
    INHALATION:REMOVE TO FRESH AIR. IF SYMPTOMS PERSIST, OBTAIN MEDICAL
    ATTENTION. SKIN CONTACT:FLUSH WITH SOAP AND WATER. EYE
    CONTACT:FLUSH WIT H WATER AT LEAST 15 MINUTES AND OBTAIN MEDICAL
    ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:80F/27C
Lower Limits:1
Upper Limits:12
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP IN ANY INERT ABSORBENT AND STORE IN A
    CLOSED CONTAINER UNTIL DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM HEAT OR FLAME. AVOID
    PROLONGED BREATHING OF FUMES. AVOID PROLONGED SKIN CONTACT. DO NOT
    USE NEAR HEAT OR FLAMES.

=============  Exposure Controls/Personal Protection  =============

Ventilation:MUST BE ADEQUATE TO AVOID EXCEEDING TLV.
Protective Gloves:IMPERMEABLE GLOVES FOR PROLONGED USE.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:F3
Vapor Density:4.7
Spec Gravity:0.99 @ 60F
pH:7
Solubility in Water:MISCIBLE
Appearance and Odor:WHITE CREAMY LIQUID, MILD PETROLEUM ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:BY FIRE OR THERMAL DECOMP:IRRITATING
    ORGANIC VAPORS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE FOLLOWING EPA AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.