MSDS Sheet 6503 Start an Order Home > Products > Chemicals & Paint > MSDS Sheets > MSDS 6503 -- [Back] LOGIN Login E-mail: Password: Apply for an account! » Advanced Search » • All Products • Fasteners » Grade 8 » Grade 5 » Threaded Fasteners • Hardware • Rivet & Rivet Guns • Vehicle Lighting » Cross Reference • Electrical Products • Tubing & Tube Fittings • Air Brake Products • Hose & Hose Ends • Cutting Tools • Abrasives • Safety Products & Welding Supplies • Chemicals & Paint » MSDS Information » CA/OTC Information • Shop Supplies • Vehicle Parts & Accessories • Assortments & Steel Equipment » Assortment Listing • Online Catalog Index • Discontinued & Overstock Specials Printer-Friendly View MSDS 6503 6503: Pb Blaster 11 Oz Net [12] 6503-1: Pb Blaster 11 Oz Net [6] 6503-9: Pb Blaster 6 Pack [1] MSDS Last updated: 10/01/2008 MSDS MATERIAL SAFETY DATA SHEET The Blaster Corporation "BLASTER" PB Penetrating Catalyst MSDS Number: PB - Aerosol Revision Date: 10/16/07 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: PB Penetrating Catalyst Revision Date: 10/16/07 MSDS Number: PB - Aerosol Common Name: PB Blaster Product Code: 16-PB, 8-PB, 8-PBS, 20-PB, 26-PB Manufacturer: The Blaster Chemical Companies, Inc. 8500 Sweet Valley Drive Valley View, Ohio 44125 (216) 901-5800 (216) 901-5801 fax www.blasterproducts, com 24 Hour emergency contact: Chemtrec (800) 424-9300 2. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous Ingredients CAS # Percent Exposure Limits Alkloxypolyethylenioxyethanol 68131-40-8 0-3 % OSHA (TWA) - N/E ACHIH (TLV) - N/E Solvent Naphtha, Heavy Aromatic** 64742-94-5 40-50% OSHA (TWA) - N/E ACGIH (TWA) - N/E Heavy Petroleum Distillate 64742-65-0 20-30% OSHA (TWA) - N/E ACGIH (TLV) - N/E Hydrotreated Light Distillate 64742-47-8 30-40% OSHA (TWA) - N/E ACGIH (PEL)-500 ppm *Denotes chemical is subject to the reporting requirements of SECTION 313 of Title III of the 1986 Super fund Amendments and Reauthorization Act (SARA) and 40 CFR PART 372. **Aromatic Naphtha contains 1-7% Naphthalene (91-20-3) and 0-1% Pseudocumene (95-63-6) 3. HAZARDS IDENTIFICATION Route of Entry: Eyes, skin, inhalation, ingestion Target Organs: Inhalation: Inhalation of spray mist may cause irritation to the respiratory tract. Skin Contact: Repeated or prolonged contact with skin may cause mild irritation and possibly dermatitis. Eye Contact: Likely to cause immediate or delayed irritation. Irritation will show as redness and/or swelling of the eyes. Ingestion: Ingestion may cause irritation to the mouth, esophagus and stomach. May aggravate pre-existing skin and respiratory disorders. Notice: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. 4. FIRST AID MEASURES Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Continue to monitor. Get medial attention. Skin Contact: Remove contaminated clothing immediately! Wash skin with soap and water. If irritation develops, seek medical attention. Eye Contact: Flush eye(s) with water for 15 minutes. Get medical attention. If eye irritation persist, obtain medical treatment. Ingestion: Do not induce vomiting! Get medical attention immediately! 5. FIRE FIGHTING MEASURES Flash Point: 155 degrees F ASTM D-56 (TCC) Extinguishing Media: Dry chemical, carbon dioxide or foam is recommended. Water may be ineffective for extinguishment, but can be useful in minimizing or dispersing vapors, protecting personnel and cooling containers. If containers are not properly cooled they can rupture in the heat of a fire. Avoid spreading burning liquid with water used for cooling purposes. Unusual Fire & Explosion Hazards: Level 3 Aerosols - Contents Under Pressure! 6. ACCIDENTAL RELEASE MEASURES Leaking aerosol cans should be put into suitable container until the internal pressure has dissipated. Use suitable absorbents to collect liquid product. Consult regulations for the disposal of the container, liquid and absorbents. 7. HANDLING AND STORAGE Handling Precautions: Use in accordance with good industrial workplace practices. Avoid unnecessary contact. Wash thoroughly after handling. Use with good ventilation. Storage Requirements: Store in a dry place away from excessive heat. Store containers with lids on and properly labeled. Do not store at temperatures above 120 degrees F. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls: Eye wash stations and emergency showers should be immediately available. Protective Equipment: Eyes and Face: Standard safety glasses with splash shields typically offer adequate protection. Where excessive splashing or spraying is possible, a face shield should be used. Skin and clothing: Excessive contact should be avoided. Neoprene gloves, boots and aprons will provide adequate protection when contact cannot be avoided. Remove and wash any contaminated clothing immediately. Wash thoroughly after handling. Respiratory: Good general ventilation should be sufficient to control airborne levels. Maintain airborne concentrations below OSHA established exposure limits of ingredients in Section 2. Exposure Guidelines/Other: The Blaster Chemical Companies takes no responsibility for determining what measures are required for personal protection in any specific application. This information should be used with discretion. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Orange viscous oily Physical State: Liquid Boiling Point: 352 F Odor: Heavy aromatic Freezing/Melting Pt: Not determined pH: Not determined Solubility: nil Vapor Pressure: Not determined Spec Grav./Density: 0.87 (water=1) Vapor Density: >1 (air=1) Heat Value: Not determined VOC: Not determined Evap. Rate: <1 (NBA=1) Bulk Density: Not determined Octanol: Not applicable Molecular Weight: Not determined Particle Size: Not applicable Softening Point: Not applicable Viscosity: Not determined Percent Volatile: Not determined Sat. Vap. Concentrat: Not determined Molecular Formula: Not determined 10. STABILITY AND REACTIVITY Stability: This product is stable. Conditions to avoid: Avoid excessive heat, sources of ignition and excessive water. Materials to avoid (incompatibility): Avoid contact with strong oxidizing agents and strong reducing agents (strong acids or bases). Avoid mixture with water. Hazardous Decomposition products: Carbon monoxide, carbon dioxide, and various hydrocarbons. Hazardous Polymerization: Will not occur. 11. TOXICOLOGICAL INFORMATION Toxicological information on this product as a mixture has not been determined. See section 15 for reportable ingredients. 12. ECOLOGICAL INFORMATION Ecological information on this product as a mixture has not been determined. 13. DISPOSAL CONSIDERATIONS Used or unused product should be disposed of in accordance with local, state, and federal regulations. Some special regulations may exist for the disposal of empty aerosol containers. Empty containers may contain residual pressure and contents. They should be handled with the same precautions as the product. 14. TRANSPORT INFORMATION Dept. of Transportation (DOT); This product, as it leaves Blaster's facilities, meets the definitions set forth in CFR 49 part 173.150c as a "consumer commodity." Allowing for certain exceptions (173.156) for domestic surface (ground) shipments. Proper shipping name: Consumer Commodity Hazard class: ORM-D International (IMDT-IATA): Proper shipping name: Aerosols, Limited Quantities Hazard class: 2 Flammable Compressed Gas UN Number: 1950 15. REGULATORY INFORMATION COMPONENT / (CAS/PERC) / CODES *Distillates, petroleum, solvent-dewaxed heavy paraffinic (64742650 40-60%) NJHS *Carbon dioxide (propellant) (124389 0-3%) MASS, OSHAWAC, PA, TXAIR REGULATORY KEY DESCRIPTIONS MASS = MA Massachusetts Hazardous Substances List OSHAWAC = OSHA Workplace Air Contaminants PA = PA Right-To-Know List of Hazardous Substances TXAIR = TX Air Contaminants with Health Effects Screening Level 16. OTHER INFORMATION Manufacturer's Disclaimer: To the best of our knowledge, the information contained herein is accurate. However, neither The Blaster Chemical Companies nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazard which exists. HMIS Ratings: NFPA Ratings: Health: 2 Health: 2 Fire: 2 Fire: 2 Reactivity: 0 Reactivity: 0 END OF MSDS DOCUMENT The information contained in this MSDS was obtained from current and reliable sources, however, the data is provided without any warrenty, expressed or implied, regarding its correctness or accuracy. Since the conditions or handling, storage and disposal of this product are beyond the control of Imperial Supplies LLC, Imperial will not be responsible for loss, injury, or expense arising out of the products improper use. No warranty, expressed or inferred, regarding the product described in this MSDS shall be created or inferred by any statement in this MSDS. Various government agencies may have specific regulations regarding the transportation, handling, storage, use, or disposal of this product which may not be covered by this MSDS. The user is responsible for full compliance. For more product information by email, click here Imperial Supplies LLC does not provide services and products outside the United States Home | My Account | Print Catalog | On-line Catalog | New Products | Imperial Services | Charts | Contact Imperial | About Imperial Conditions of Use | Warranty | Opt Out | Career Opportunities | Request Info | Downloads | Privacy Policy | Links | Site Map | HELP! © 2010 Imperial Supplies LLC Questions or comments? Contact us.